Barrel-leg trousers curve: roomy through the thigh and knee, then narrowing to the ankle, so the leg reads as a soft arc rather than a straight tube. Ourlette drafts them from a trouser block with your measurements and a regular fit, with the curve set from your knee and ankle, a high rise, one pleat on each front for the fullness and an ankle length that shows the shape. In denim they are the barrel jeans; in linen, the summer version.
Barrel-leg trousers options
Every option redraws the pattern instantly, without using any AI:
- Leg: barrel by default; wide, straight, tapered, flare, bootcut, slim, skinny or jogger instead.
- Pleats: one on each front by default; two, or a flat front.
- Rise and length: high rise and ankle length by default; mid, low or extra high; capri or full length, with a length adjustment of up to 25 cm (10 in).
- Pockets: slanted front pockets and welt back pockets by default; jeans scoop pockets, in-seam or patch pockets; patch, flap or no back pockets.
- Waist and closure: a straight waistband with belt loops and a zip fly by default; a contoured band, an elastic or drawstring waist; a button fly, a side or back zip.
- Fit and hem: regular by default, or fitted, relaxed or oversized, plus extra hip ease; a plain hem by default, or a turn-up, elastic or rib cuffs.
Made to measure or a standard size
Enter your own measurements or start from a standard size: women's EU 32–54 (US 0–22, UK 4–26), men's XS to 3XL, or children's 2 to 14 years. The barrel shape depends on where your knee and ankle are, so height and inseam matter as much as waist and hip; the measuring assistant explains each. Our post on crotch depth vs crotch length covers the two measurements that decide how high-rise trousers sit.
Best fabrics for barrel-leg trousers
Fabrics with body, so the curve holds: cotton twill, denim, cotton drill, linen, wool flannel, Tencel twill or corduroy. Very soft fabrics collapse the barrel. Our post on sewing with denim covers needles and thread for a denim pair, and sewing with linen the summer one.
How hard is it to sew?
A project for a confident sewist: a zip fly with its shield, welt back pockets, a front pleat and a waistband; the curved leg sews like any other. Allow eight to ten hours. Our post on how to sew welt pockets covers the step that shows most, and how to press seams properly the curved outseam.
What's in the pattern
- Two fronts and two backs
- Two front pocket facings and four pocket bags
- A fly shield, the waistband and a belt loop strip
- Four jettings and four bags for the welt back pockets
Notions: a trouser zip; a trouser hook and bar or a button for the waistband; two buttons, 12 mm (1/2 in), for the back pockets; fusible interfacing for the waistband and fly; about 60 cm (24 in) of pocketing. The guide lists every piece with its cut count, the notions with their quantities, the fabric quantity for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout; the fabric chart gives every size.
How to sew barrel-leg trousers
- Fuse the interfacing to the waistband and fly pieces; sew the back darts.
- Make the welt back pockets, fold and stitch the front pleats, and sew the slanted front pockets.
- Sew the zip fly with its shield, then the centre back seam.
- Sew the outseams and the inseams, pressing the curves over a ham.
- Make the belt loops and attach the waistband.
- Hem the legs with a double fold, finish the waistband closure, sew the pocket buttons and press.
A toile in calico shows whether you want more or less curve: the hip ease option changes it in a click.
Frequently asked questions
How much fabric do I need for barrel-leg trousers?
About 1.9 to 2.3 m (2 1/8 to 2 1/2 yd) of 140 or 150 cm (55 or 60 in) wide fabric depending on the size, and 2.3 m (2 1/2 yd) at 110 cm (45 in) in EU 38, plus about 60 cm (24 in) of pocketing. Ourlette computes the exact quantity for your size, length and fabric width, with a cutting layout.
What is the difference between barrel, balloon and wide-leg trousers?
Wide legs fall straight from the hip; a barrel leg curves out at the thigh and knee and back in at the ankle; a balloon leg is a fuller barrel, usually gathered or pleated into a cuff. Set the leg to barrel and add hip ease for a balloon, or see the pleated wide-leg trousers for the straight version.
Is this barrel-leg trousers pattern free?
Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.
Can I make barrel trousers from a photo?
Yes. Start from this tested pattern and set the leg, rise, pleats and length yourself to match your photo, or, on the Maker and Atelier plans, upload the photo or paste a Pinterest or Instagram link, and Ourlette's AI pattern maker drafts the trousers in it from scratch. You can change any option by hand afterwards.






