Pleated wide-leg trousers are the tailored trousers of the 1940s and of today's palazzo pants: a high rise that sits at the natural waist, two pleats on each front that release into a wide, straight leg, and a turn-up at the hem for weight. Ourlette drafts them from a trouser block with your waist, hip, rise and leg measurements, so the pleats fall from the waistband without pulling and the crotch curve is yours, not a size chart's.
Wide-leg trousers options
Every option redraws the pattern instantly, without using any AI:
- Pleats: two on each front by default, or one, or a flat front.
- Leg: wide by default, falling straight from the hip; straight, tapered, barrel, bootcut, flare, slim or skinny instead.
- Rise: high by default, at the natural waist; mid, low or extra high.
- Length: full by default, from short to ankle, with a length adjustment of up to 25 cm (10 in); a turn-up hem by default, or a plain hem, a side slit, rib or elastic cuffs.
- Pockets: slanted front pockets and welt back pockets with a button by default; jeans scoop pockets, in-seam or patch pockets at the front; patch, flap or no back pockets; cargo pockets on the thighs.
- Waist and closure: a straight waistband with belt loops and a zip fly by default; a contoured band, an elastic or drawstring waist, a faced waist; a button fly, a side or back zip, or pull-on.
- Fit: regular by default, or fitted, relaxed or oversized, plus extra hip ease, and a stretch setting for fabrics with elastane.
Made to measure or a standard size
Enter your own measurements or start from a standard size: women's EU 32–54 (US 0–22, UK 4–26), men's XS to 3XL, or children's 2 to 14 years. Trousers need a few more numbers than a skirt: your waist, hip, inseam and crotch depth decide the fit, and the measuring assistant walks you through each. Our post on how to measure yourself for trousers shows where the tape goes.
Best fabrics for wide-leg trousers
Fabrics with weight and drape, so the pleats fall and the legs swing: wool flannel, wool suiting, linen, Tencel twill, viscose crepe, cotton drill or corduroy. Light, stiff fabrics stand away at the pleats. Our post on fabrics for trousers compared weighs twill, linen, Tencel and ponte; sewing with linen covers the pre-wash and the pressing.
How hard is it to sew?
A project for a confident sewist, and a good first pair of tailored trousers: the zip fly with its shield, the welt back pockets and the pleats are each explained in the guide with your pattern's own numbers. Allow 8 to 10 hours. Our post on how to sew welt pockets covers the step that shows most, and fitting trousers: the five most common problems what to check on the toile.
What's in the pattern
- Two fronts and two backs
- Two front pocket facings and four pocket bags
- A fly shield, the waistband and a belt loop strip
- Four jettings and four bags for the welt back pockets
Notions: a trouser zip, with the length given for your size; a trouser hook and bar or a button for the waistband; two buttons, 12 mm (1/2 in), for the back pockets; fusible interfacing for the waistband and fly; about 60 cm (24 in) of pocketing. The guide lists every piece with its cut count, the notions with their quantities, the fabric quantity for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout; the fabric chart gives every size.
How to sew wide-leg trousers
- Fuse the interfacing to the waistband and fly pieces; sew the back darts.
- Make the welt back pockets, then fold and stitch the front pleats and sew the slanted front pockets.
- Sew the zip fly with its shield.
- Sew the centre back seam, the outseams and the inseams.
- Make the belt loops and attach the waistband.
- Press and stitch the turn-up hems; make the waistband buttonhole or set the hook and bar, sew the pocket buttons and press.
Before cutting your wool, make a toile in calico: the rise and the pleat position are the two things to check.
Frequently asked questions
How much fabric do I need for wide-leg trousers?
An adult pair takes 2.3 to 2.7 m (2 1/2 to 3 yd) of 140 or 150 cm (55 or 60 in) wide fabric depending on the size, and about 2.6 m (2 7/8 yd) at 110 cm (45 in) in EU 38; wide legs cannot be laid side by side, so the width of the fabric matters less than for slim trousers. Ourlette computes the exact quantity for your size, length and fabric width, with a cutting layout.
Can I make them without the pleats?
Yes. Set the pleats to none for a flat front: the trousers keep their high waist and wide leg, closer to palazzo pants. For an elastic-waist version with no fly, see the pull-on trousers pattern, which has a wide leg too.
Is this wide-leg trousers pattern free?
Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.
Can I make trousers from a photo?
Yes. Start from this tested pattern and set the leg, rise, pleats and pockets yourself to match your photo, or, on the Maker and Atelier plans, upload the photo or paste a Pinterest or Instagram link, and Ourlette's AI pattern maker drafts the trousers in it from scratch. You can change any option by hand afterwards.






