Tops

Zip-up hoodie sewing pattern

A zip-up hoodie in French terry or fleece: a lined hood, a separating zip down the front, two patch pockets at the hips, rib knit cuffs and hem band, long sleeves and room for a T-shirt under it, drafted to your measurements or a standard size for women, men and children. Free to make; print it with its sewing guide, free as your first PDF, then with Library.

Difficulty: Intermediate 10 pieces knit
Free: adjust it to your measurements, preview it in 3D and print it as your free PDF. After it, Library prints the whole catalogue from $2.99 a month.
Zip-up hoodie

What you get

The pattern pieces for size EU 38 / US 6, drawn by Ourlette's drafting engine (seam allowances included).

A zip-up hoodie is the layer everyone owns: a hood you can line in a contrast print, a zip that opens all the way, pockets for your hands and ribbing at the cuffs and hem. Ourlette drafts it from a knit block with your measurements and jacket ease, so it goes over a T-shirt or a shirt, with faced front edges to carry the zip and a two-piece hood cut twice, in the main fabric and in a lining.

Zip-up hoodie options

Every option redraws the pattern instantly, without using any AI:

  • Hood: a lined hood by default; a rib knit collar for a track jacket, a band collar, or none.
  • Front: a separating zip by default; a half placket for a pullover, buttons or snaps.
  • Pockets: two patch pockets with angled corners by default; slanted welt hand pockets, in-seam pockets, or none; a kangaroo pocket on a pullover version.
  • Cuffs and hem: rib knit by default, with a height you set; plain hems, band cuffs or an elastic casing.
  • Fit and length: regular over a T-shirt by default, or fitted, relaxed or oversized, plus extra ease; hip length by default, from cropped to thigh, with a length adjustment of up to 25 cm (10 in).
  • Sleeves: long by default; three-quarter or short; set-in, raglan or dropped shoulder.

Made to measure or a standard size

Use your own measurements or a standard size: women's EU 32–54 (US 0–22, UK 4–26), men's XS to 3XL, or children's 2 to 14 years. The hoodie is cut straight for every body; height, bust or chest, waist and hip are enough to start, and your arm length sets the sleeves with their cuffs. Our post on sewing for men and our guide on how to measure a child help with the other bodies in the house.

Best fabrics for a zip-up hoodie

French terry, sweatshirt fleece, cotton fleece or loopback jersey for the body, with rib knit for the cuffs and hem band and a jersey or the same fabric for the hood lining; polar fleece for a warm one. Our post on sewing with French terry covers needles, stitches and the ribbing ratio.

How hard is it to sew?

An intermediate knit project: the separating zip is the step that asks for care, set between the fronts and their facings; the hood and the ribbing are straightforward. Allow five to six hours. Our posts on how to shorten a zip and how to sew a cuff: knit bands cover the two details that come up, and the sweatshirt and hoodie pattern is the pullover version.

What's in the pattern

  • Two fronts and a back cut on the fold
  • Two sleeves and two rib cuffs
  • The hood, cut as a pair in the main fabric and in lining
  • Two patch pockets
  • A rib hem band, and two front facings with their interfacing

Notions: a separating (open-ended) zip, with the length given for your size; ribbing, matching or contrast; medium-weight fusible interfacing for the facings; a ballpoint or stretch needle. The guide lists every piece with its cut count, the notions with their quantities, the fabric, ribbing and lining quantities for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout; the fabric chart gives every size.

How to sew a zip-up hoodie

  1. Fuse the interfacing to the facings and staystitch the neckline.
  2. Sew the patch pockets to the fronts.
  3. Join the shoulders, sew the zip between the fronts and the facings, and turn the facings in.
  4. Assemble the hood and its lining and sew the hood to the neckline, enclosing the facing ends.
  5. Set the sleeves in flat and sew each side and sleeve seam in one pass.
  6. Sew on the rib cuffs and the hem band, stretching them to fit, and press.

A walking foot keeps the thick layers at the zip from shifting; our post on how to sew with a walking foot explains when to use it.

Frequently asked questions

How much fabric do I need for a zip-up hoodie?

About 1.3 to 1.9 m (1 1/2 to 2 1/8 yd) of 140 or 150 cm (55 or 60 in) wide French terry depending on the size, and 1.7 m (1 7/8 yd) at 110 cm (45 in) in EU 38, plus about 20 cm (8 in) of ribbing and 50 cm (20 in) of lining for the hood. Ourlette computes the exact quantities for your size and fabric width, with a cutting layout.

Can I make it a pullover hoodie with a kangaroo pocket?

Yes. Switch the front to none or to a half placket and the pockets to kangaroo: the fronts are then cut in one piece with the pocket across them. That is the sweatshirt and hoodie pattern in another form; both print as your first free PDF.

Is this zip-up hoodie pattern free?

Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.

Can I make a hoodie from a photo?

Yes. Start from this tested pattern and set the hood, pockets, cuffs and length yourself to match your photo, or, on the Maker and Atelier plans, upload the photo or paste a Pinterest or Instagram link, and Ourlette's AI pattern maker drafts the hoodie in it from scratch. You can change any option by hand afterwards.