Tops

Wrap top sewing pattern

A waist-length top whose fronts cross over and tie at the waist, with the V neckline the wrap forms, faced front edges and three-quarter sleeves: the ballet wrap top, drafted to your measurements or a standard women's size, in woven fabric or knit. Free to make; print it with its sewing guide, free as your first PDF, then with Library.

Difficulty: Intermediate 7 pieces woven · knit
Free: adjust it to your measurements, preview it in 3D and print it as your free PDF. After it, Library prints the whole catalogue from $2.99 a month.
Wrap top

What you get

The pattern pieces for size EU 38 / US 6, drawn by Ourlette's drafting engine (seam allowances included).

A wrap top closes without a zip or a button: one front crosses over the other, and a tie on each front passes through an opening in the side seam and knots at the waist. Ourlette drafts a true wrap, not a faux one: the two fronts are cut as a pair with an overlap worked out from your bust, so the V neckline sits where it should and the top stays closed. In jersey it is the ballet wrap top; in viscose or lawn, a blouse to tuck into a skirt.

Wrap top options

Every option redraws the pattern instantly, without using any AI:

  • Sleeves: three-quarter and straight by default; none, cap, short, elbow or long; fitted, puff, bell or bishop; set-in, raglan, dropped or kimono.
  • Length: waist by default, where the ties knot; cropped or high hip, with a length adjustment of up to 25 cm (10 in). Below the hip, Ourlette finishes the front edges with a bias facing instead of the shaped facing.
  • Fit: regular by default, or fitted, relaxed or oversized, plus extra chest ease; bust darts are drafted automatically on woven fabric and left out on knits.
  • Neckline depth: the V the wrap forms, lowered or raised by up to 4 cm (1 1/2 in).
  • Cuffs and hem: hemmed, or band, rib or elastic cuffs; a straight hem by default, or a peplum or ruffle below the waist.
  • Tie belt: the wrap's own ties by default; add a separate tie belt.

Made to measure or a standard size

Use your own measurements or a standard women's size, EU 32–54 (US 0–22, UK 4–26); height, bust, waist and hip are enough to start. The overlap and the depth of the V come from your bust and your front waist length, which is why a made-to-measure wrap gapes less than a graded one. Our post on how to fix a gaping neckline explains what to check on the toile.

Best fabrics for a wrap top

Fabrics with drape, so the fronts lie flat and the ties knot softly: viscose crepe, rayon challis, Tencel, cotton lawn or silk crepe de chine in woven; cotton jersey or a light rib for a knit ballet wrap. Our post on sewing viscose without tears covers cutting and pressing slippery fabric. Avoid stiff cottons: the overlap would stand away.

How hard is it to sew?

An intermediate project without any fastening to sew: the care goes into the long faced front edges, the bust darts and the opening left in the side seam for the tie. Allow four to five hours. The facing is interfaced and understitched so it stays inside; our post on keeping a facing from rolling out shows how.

What's in the pattern

  • Two fronts, cut as a pair, and a back cut on the fold
  • Two sleeves
  • Two front facings with their interfacing, and a back neck facing
  • Two wrap ties

Notions: light fusible interfacing; nothing else. The guide lists every piece with its cut count, the fabric quantity for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout; see the fabric chart for every size.

How to sew a wrap top

  1. Fuse the interfacing to the facings and staystitch the neckline.
  2. Sew the bust darts (woven fabric) and press them down.
  3. Join the shoulders, then sew the front facings and the back neck facing to the fronts and the neckline, understitch and turn.
  4. Sew the side seams, leaving the opening for the tie on one side, and the sleeve seams.
  5. Set in the sleeves and hem them.
  6. Hem the body, make the ties, sew them to the front edges at the waist and press.

Check the overlap on a toile first if your bust and waist are far from a standard size.

Frequently asked questions

How much fabric do I need for a wrap top?

About 1.2 to 1.8 m (1 3/8 to 2 yd) of 140 or 150 cm (55 or 60 in) wide fabric depending on the size, and 1.7 m (1 7/8 yd) of 110 cm (45 in) wide fabric in EU 38, plus 60 cm (24 in) of light interfacing; the long ties take much of it. Ourlette computes the exact quantity for your size and fabric width, with a cutting layout.

Is this a true wrap or a faux wrap?

A true wrap: the two fronts are separate, cross over each other and tie through an opening in the side seam, so the top opens flat and adjusts to you. The wrap dress in the catalogue works the same way; a faux wrap with a fixed overlap and a zip is a top builder option.

Is this wrap top pattern free?

Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.

Can I make a wrap top from a photo?

Yes. Start from this tested pattern and set the sleeves, length and fit yourself to match your photo, or, on the Maker and Atelier plans, upload the photo or paste a Pinterest or Instagram link, and Ourlette's AI pattern maker drafts the top in it from scratch. You can change any option by hand afterwards.