The western shirt is a dress shirt with cowboy details: yokes that come to a point front and back, pockets with pointed flaps, pearl snaps instead of buttons and a collar with long points. Ourlette drafts it from a shirt block with your measurements and a regular fit, with the yokes cut as separate pieces, a box placket, tower sleeve plackets and buttoned-style cuffs that close with snaps, and flat-felled seams throughout.
Western shirt options
Every option redraws the pattern instantly, without using any AI:
- Yokes: pointed front and back yokes by default, with their depths adjustable; straight or curved yokes, or none; a box, inverted or side pleats below the back yoke.
- Fastening: snaps by default; buttons and buttonholes instead. The number and size are set for you, or set them yourself.
- Collar: long points by default; classic, spread, rounded or button-down, and a collar size from 70 to 150 %.
- Pockets: two chest pockets with pointed flaps by default; square, rounded or angled flaps, a single pocket, or none.
- Sleeves and cuffs: long sleeves with tower plackets and cuffs by default; short sleeves, band cuffs, roll-up tabs.
- Fit, length and hem: regular by default, or fitted, relaxed or oversized; below the seat by default, with a length adjustment of up to 25 cm (10 in); a shirttail hem by default, or straight with side slits.
- Topstitching: matching by default; contrast, or none.
Made to measure or a standard size
Enter your own measurements or start from a standard size: women's EU 32–54 (US 0–22, UK 4–26), men's XS to 3XL, or children's 2 to 14 years. The yokes are drafted on your shoulders, so their points land where they should; your neck sets the collar and your arm length the sleeves. Our post on how to measure shoulder width covers the measurement that matters most on a yoked shirt.
Best fabrics for a western shirt
Denim shirting, chambray, cotton twill, flannel, cotton poplin, sateen or fine corduroy. Plaids and stripes are classic, and the yokes are a chance to cut them on the bias; our post on how to match plaids and stripes shows how. Pearl snaps need a medium-weight fabric to hold.
How hard is it to sew?
A project for an experienced sewist: fifteen pieces, yokes with points to turn cleanly, flaps, tower plackets, a collar on a stand and flat-felled seams, plus snaps set with a tool. Nothing is hard alone; the shirt rewards patience. Allow 10 to 12 hours. Our posts on how to sew a yoke with the burrito method and how to sew a placket cover the two techniques it rests on.
What's in the pattern
- Two front yokes and a back yoke, and two fronts and a back
- Two sleeves, with their tower plackets and underlaps
- Four cuff pieces with interfacing
- Collar and collar stand with their interfacing
- Two chest pockets and four flap pieces
Notions: snap fasteners, 11 mm (7/16 in), with their setting tool, for the front, the cuffs and the flaps; a few buttons of the same size; light fusible interfacing; topstitching thread. The guide lists every piece with its cut count, the notions with their quantities, the fabric quantity for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout; the fabric chart gives every size.
How to sew a western shirt
- Fuse the interfacing, set up for topstitching and practice a flat-felled seam on scraps.
- Fold and stitch the box placket; make the pointed pockets and flaps and topstitch them to the fronts.
- Sew the front yokes to the fronts and the back yoke to the back with the burrito method, so the inside is clean.
- Make the collar and sew it to the neckline between the stand pieces.
- Sew the tower plackets, set the sleeves in flat, fell the side and sleeve seams, and attach the cuffs.
- Hem the shirttail, set the snaps and press.
Set a test snap on a scrap first: the tool and the fabric thickness decide how hard to strike.
Frequently asked questions
How much fabric do I need for a western shirt?
About 1.5 to 2.3 m (1 5/8 to 2 1/2 yd) of 140 or 150 cm (55 or 60 in) wide fabric depending on the size, and 2.2 m (2 3/8 yd) at 110 cm (45 in) in EU 38, plus 50 cm (20 in) of light interfacing; matching a plaid across the yokes adds a little. Ourlette computes the exact quantity for your size and fabric width, with a cutting layout.
Snaps or buttons?
Snaps are the western look and are faster to close, but need a setting tool and a fabric with some body. Switch the fastening option to buttons and Ourlette draws buttonholes instead; everything else stays the same.
Is this western shirt pattern free?
Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.
Can I make a western shirt from a photo?
Yes. Start from this tested pattern and set the yokes, pockets, collar and fastening yourself to match your photo, or, on the Maker and Atelier plans, upload the photo or paste a Pinterest or Instagram link, and Ourlette's AI pattern maker drafts the shirt in it from scratch. You can change any option by hand afterwards.







