Tops

Raglan T-shirt sewing pattern

A knit T-shirt with raglan sleeves, a neckband and a straight hem, drafted to your own measurements or a standard size, for women, men and children. Free to make and preview in 3D; print it with its sewing guide, free as your first PDF, then with Library.

Difficulty: Easy 5 pieces knit
Free: adjust it to your measurements, preview it in 3D and print it as your free PDF. After it, Library prints the whole catalogue from $2.99 a month.
Raglan T-shirt

What you get

The pattern pieces for size EU 38 / US 6, drawn by Ourlette's drafting engine (seam allowances included).

A raglan T-shirt is the baseball tee: its sleeves run in one piece from the underarm up to the neckline, with a diagonal seam instead of a round armhole, so a contrast sleeve is easy and the shoulders have nothing to fit. Ourlette drafts it from a knit block with your measurements and a regular fit, about 5 cm (2 in) of ease at the bust or chest in a stable jersey. It is the easiest sleeved top in the catalogue, and a good first knit project.

Raglan T-shirt options

Every option redraws the pattern instantly, without using any AI:

  • Sleeves: three-quarter by default (the classic baseball length), or cap, short, elbow or long, or none; straight by default, or fitted, puff, bell or bishop.
  • Sleeve construction: raglan by default; set-in, dropped shoulder or kimono turn it into another tee.
  • Fit and length: fitted, regular (default), relaxed or oversized, plus extra chest ease; from cropped to ankle length (hip by default), with a length adjustment of up to 25 cm (10 in) either way.
  • Neckline: round (default), high round, scoop, V-neck, boat or square, with depth and width adjustments.
  • Cuffs and hem: hemmed, or rib knit or band cuffs; a straight hem, a rib band or a shirttail curve. Rib cuffs and a rib hem band make it a raglan sweatshirt.
  • Pockets: none by default; add a kangaroo or patch pocket.

Made to measure or a standard size

Enter your own measurements (height, bust or chest, waist and hip are enough to start) or pick a standard size: women's EU 32–54 (US 0–22, UK 4–26), men's XS to 3XL, or children's 2 to 14 years. The raglan seam makes the shoulder forgiving, which is why this tee suits every body: there is no shoulder point to place. Our guide on how to take your body measurements shows where the tape goes.

Best fabrics for a raglan T-shirt

A knit with at least 20 % stretch across the grain: cotton jersey, cotton-elastane jersey, slub jersey, bamboo jersey, waffle knit or light French terry for a sweatshirt feel. Cut the sleeves in a contrast colour for the classic look. Read our post on jersey knit for beginners before you cut: pre-wash the fabric and use a ballpoint needle.

How hard is it to sew?

A first knit project. There are only four seams on the body, no armhole to ease in, and the neckband is the one step that asks for care. With a regular sewing machine and a narrow zigzag or a stretch stitch, allow two to three hours; our guide to sewing knit fabrics on a regular machine covers the settings.

What's in the pattern

  • Front and back, each cut on the fold
  • Front and back raglan sleeves, two of each: the sleeve is cut in two halves with a seam along the top of the arm, which shapes the shoulder
  • A neckband, cut once with the stretch running along its length

Notions: a ballpoint or stretch needle, matching thread. The guide lists each piece with its cut count, the fabric quantity for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout; the fabric chart gives every size.

How to sew a raglan T-shirt

  1. Staystitch the neckline so it does not stretch while you sew.
  2. Sew the front sleeve halves to the front and the back halves to the back, along the raglan seams, then the sleeve top seams.
  3. Sew the neckband into a ring, fold it and stretch it evenly onto the neckline; our post on sewing a neckband that lies flat explains the ratio.
  4. Sew each side seam and sleeve seam in one pass.
  5. Hem the sleeves and the body with a twin needle or a zigzag, and press.

If your fabric is very stretchy or very stable, make a quick toile of the body only: a knit tee lives or dies by its ease.

Frequently asked questions

How much fabric do I need for a raglan T-shirt?

About 1.5 m (1 5/8 yd) of 140 or 150 cm (55 or 60 in) wide jersey for women's EU 32–42 and men's S, and 1.6 m (1 3/4 yd) for the larger sizes; a child's tee takes 0.5 to 1.4 m (5/8 to 1 1/2 yd). Ourlette computes the exact quantity for your size, fabric width and sleeve length, with a cutting layout, and the contrast sleeves separately if you cut them in another colour.

What is the difference between a raglan and a set-in sleeve?

A set-in sleeve is sewn into a round armhole and meets the body at the shoulder point. A raglan sleeve runs up to the neckline in one piece, with a diagonal seam from the underarm to the neck, so there is no shoulder seam to fit and the sleeve can be a contrast colour. Ourlette drafts both: switch the sleeve construction option and the pattern redraws.

Is this raglan T-shirt pattern free?

Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.

Can I turn it into a raglan sweatshirt?

Yes. Choose long sleeves, rib knit cuffs and a rib hem band, cut it in French terry or sweatshirt fleece, and add a kangaroo pocket or a hood if you like. For a hooded pullover with a classic set-in sleeve, see the sweatshirt and hoodie pattern.