Tops

Peplum top sewing pattern

A fitted woven top with bust darts, a round neckline, short sleeves, an invisible back zip and a flared peplum sewn to the waist: drafted to your measurements or a standard women's size. Free to make; print it with its sewing guide, free as your first PDF, then with Library.

Difficulty: Intermediate 7 pieces woven
Free: adjust it to your measurements, preview it in 3D and print it as your free PDF. After it, Library prints the whole catalogue from $2.99 a month.
Peplum top

What you get

The pattern pieces for size EU 38 / US 6, drawn by Ourlette's drafting engine (seam allowances included).

A peplum top is a fitted bodice that ends at the waist, with a short flared skirt, the peplum, sewn to its lower edge so it stands away over the hips. Ourlette drafts the bodice from a block with your bust, waist and shoulder measurements and the peplum as two quarter-circle flounces whose inner edge is exactly your bodice's waist, so the flare falls in even ripples with no gathers. It pairs with a pencil skirt or high-waisted trousers.

Peplum top options

Every option redraws the pattern instantly, without using any AI:

  • Peplum: its height in proportion to the top by default, or any height up to 40 cm (16 in); switch the hem to a gathered ruffle, a band or a straight edge.
  • Fit: fitted by default, with bust darts; regular, relaxed or oversized; add waist darts for a closer bodice.
  • Length: the peplum ends at the high hip by default; cropped to hip, with a length adjustment of up to 25 cm (10 in).
  • Neckline: round by default, or high round, scoop, V-neck, boat, square or sweetheart, with depth and width adjustments; or a Peter Pan or tie collar.
  • Sleeves: short and straight by default; none, cap, elbow, three-quarter or long; fitted, puff, bell or bishop.
  • Opening: an invisible back zip by default; a back keyhole with a button, a button front or none for a wide neckline.

Made to measure or a standard size

Enter your own measurements (height, bust, waist and hip, then the rest from the nearest size) or start from a standard women's size, EU 32–54 (US 0–22, UK 4–26). The fit matters more here than on a loose top: the bodice should sit close at the waist so the peplum flares from the right place. Our guide on how to take your body measurements shows the waist and the bust point.

Best fabrics for a peplum top

A light to medium woven with some body: cotton poplin, cotton sateen, linen, crepe, viscose twill, a light jacquard or silk dupion for an evening version. Crisp fabrics make the peplum stand out; crepe and viscose let it ripple close to the body. Avoid knits: the shape relies on darts and a zip. Our post on sewing with cotton poplin is a good start.

How hard is it to sew?

An intermediate project: bust darts, an invisible zip that runs through the waist seam, a neck facing and set-in sleeves. The peplum itself is easy, a curved seam with no gathers. Allow five to six hours. Our guides on sewing darts that lie flat and inserting an invisible zip cover the two steps that show.

What's in the pattern

  • Front, cut on the fold, and back, cut as a pair for the zip
  • Two sleeves
  • Peplum front, cut on the fold, and peplum back, cut as a pair
  • Front and back neck facings with their interfacing

Notions: an invisible zip and light fusible interfacing; the guide gives the zip length for your size, lists every piece with its cut count, the fabric quantity for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout. See the fabric chart for every size.

How to sew a peplum top

  1. Fuse the interfacing to the facings and staystitch the neckline.
  2. Sew the bust darts and press them down.
  3. Sew the peplum fronts and backs together at the side seams, then sew the peplum to the bodice at the waist.
  4. Insert the invisible zip down the centre back, through the waist seam.
  5. Join the shoulders and attach the neck facing; sew the side seams.
  6. Set in the sleeves, hem the sleeves and the peplum with a narrow hem, and press.

Because the bodice is fitted, make a toile of the bodice alone in an old sheet before cutting your fabric.

Frequently asked questions

How much fabric do I need for a peplum top?

About 0.9 to 1.2 m (1 to 1 3/8 yd) of 140 or 150 cm (55 or 60 in) wide fabric depending on the size, and 1.1 m (1 1/4 yd) of 110 cm (45 in) wide fabric in EU 38, plus a little interfacing. Ourlette computes the exact quantity for your size, sleeves and peplum height, with a cutting layout.

Can I make the peplum longer or fuller?

Yes. Set the peplum height up to 40 cm (16 in) for a longer flounce, or increase the length so it ends lower on the hip. For more fullness, switch the hem to a gathered ruffle instead of the flared peplum; the gathering ratio calculator helps you choose how full.

Is this peplum top pattern free?

Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.

Can I make a peplum top from a photo?

Yes. Start from this tested pattern and set the neckline, sleeves and peplum yourself to match your photo, or, on the Maker and Atelier plans, upload the photo or paste a Pinterest or Instagram link, and Ourlette's AI pattern maker drafts the top in it from scratch. You can change any option by hand afterwards.