A henley is a T-shirt with a short placket at the neck, three buttons and no collar: the grandad shirt, the waffle thermal, the casual layer under a shirt or a jacket. Ourlette drafts it from a knit block with your measurements and a regular fit, and draws the placket as a separate interfaced piece so the slit stays crisp in a stretchy fabric. In a woven fabric such as double gauze it becomes a popover top.
Henley options
Every option redraws the pattern instantly, without using any AI:
- Placket: three buttons by default; set the number (two to fourteen) and the button size, or let Ourlette space them.
- Sleeves: long by default, or none, cap, short, elbow or three-quarter; straight, fitted, puff, bell or bishop; set-in, raglan, dropped or kimono.
- Cuffs and hem: hemmed by default, or rib knit, band or buttoned cuffs; a straight hem, a shirttail curve or a rib band.
- Fit and length: fitted, regular (default), relaxed or oversized; cropped to ankle length, hip by default, with a length adjustment of up to 25 cm (10 in).
- Neckline: round by default, or high round, scoop or V-neck.
- Pockets: none by default; one or two chest pockets, a kangaroo pocket.
Made to measure or a standard size
Enter your own measurements or start from a standard size: women's EU 32–54 (US 0–22, UK 4–26), men's XS to 3XL, or children's 2 to 14 years. Height, bust or chest, waist and hip are enough to start; the rest are filled in from the nearest size and can be refined. Men's and children's versions are drafted without darts; a women's henley in jersey is too.
Best fabrics for a henley
Waffle knit and cotton rib give the classic thermal look; cotton jersey, slub jersey and linen jersey make a lighter top; a thermal knit or brushed jersey a warm one. Choose a knit with at least 20 % stretch, or a soft woven such as double gauze or cotton lawn for a popover (then pick woven as the fabric, and Ourlette adds bust darts for women). Our post on sewing with rib knit covers the bands and the stretch.
How hard is it to sew?
An easy project with one careful step: the placket. It is sewn to a slit in the front, turned and topstitched, then the neckline is finished with a bias facing. The rest is a T-shirt. Allow three to four hours, and read how to sew a placket before you start.
What's in the pattern
- Front and back, each cut on the fold
- Two sleeves
- Two placket strips with their interfacing
- A neck bias facing
Notions: three buttons, 11 mm (7/16 in), light fusible interfacing, a ballpoint or stretch needle for knits. The guide lists every piece with its cut count, the notions with their quantities, the fabric quantity for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout; see the fabric chart for every size.
How to sew a henley
- Fuse the interfacing to the placket strips and staystitch the neckline.
- Sew the placket to the slit in the front, turn and press it, and topstitch the overlap.
- Join the shoulders and finish the neckline with the bias facing.
- Set the sleeves in flat, then sew each side and sleeve seam in one pass.
- Hem the sleeves and the body with a twin needle or zigzag.
- Make the buttonholes, sew the buttons and press.
Ask the guide when a step is unclear: it answers about your pattern, in your fabric.
Frequently asked questions
How much fabric do I need for a henley?
An adult henley with long sleeves takes 1.5 to 1.7 m (1 5/8 to 1 7/8 yd) of 140 or 150 cm (55 or 60 in) wide knit depending on the size, and about 1.6 m (1 3/4 yd) of 110 cm (45 in) wide fabric in EU 38, plus 30 cm (12 in) of light interfacing. Ourlette computes the exact quantity for your size and fabric width, with a cutting layout.
Can I sew a henley in woven fabric?
Yes. Choose woven as the fabric and cut it in double gauze, cotton lawn or linen: Ourlette adds bust darts for women and drafts the neckline a little larger, since the fabric does not stretch over the head. The placket and bias facing are the same.
Is this henley pattern free?
Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.
Can I make a henley from a photo?
Yes. Start from this tested pattern and set the sleeves, the number of buttons, the neckline and the fit yourself to match your photo, or, on the Maker and Atelier plans, upload the photo or paste a Pinterest or Instagram link, and Ourlette's AI pattern maker drafts the top in it from scratch. You can change any option by hand afterwards.







