Flared trousers sit high on the waist, hug the hip and thigh, and open from the knee into a flare that covers the shoe: the 1970s silhouette that keeps coming back. Ourlette drafts them from a trouser block with your waist, hip, thigh and inseam measurements and a fitted cut, so the leg is close where it should be and the flare starts at your knee, not at a size chart's. Patch pockets at the back and slanted pockets at the front keep the look clean.
Flared trousers options
Every option redraws the pattern instantly, without using any AI:
- Leg: flare by default; bootcut for a gentler kick, or wide, straight, barrel, tapered, slim or skinny.
- Rise and fit: high rise and fitted by default; mid, low or extra high; regular, relaxed or oversized, plus extra hip ease and a stretch setting for fabrics with elastane.
- Length: full by default, to the floor in your shoes; ankle or capri for a kick flare, with a length adjustment of up to 25 cm (10 in).
- Pockets: slanted front pockets and patch back pockets by default; jeans scoop pockets or in-seam pockets; welt, flap or no back pockets.
- Waist and closure: a straight waistband with belt loops and a zip fly by default; a contoured band, a faced waist, an elastic waist for pull-on flares; a button fly, a side or back zip.
- Hem: plain by default; a turn-up or a side slit.
Made to measure or a standard size
Enter your own measurements or start from a standard size: women's EU 32–54 (US 0–22, UK 4–26), men's XS to 3XL, or children's 2 to 14 years. Fitted trousers show every measurement: waist, hip, thigh, crotch depth and inseam, and the knee height that sets where the flare begins. The measuring assistant explains each; our post on fitting trousers: the five most common problems tells you what to look for on the toile.
Best fabrics for flared trousers
Fabrics with a little stretch or drape: stretch twill, corduroy, wool crepe, a stable ponte knit, cotton sateen, crepe or stretch denim. Set the stretch option for fabrics with 2 to 3 % elastane. Our post on sewing with corduroy covers the 70s fabric, and fabrics for trousers compared the rest.
How hard is it to sew?
A project for a confident sewist: the zip fly and the fit are the work; the patch pockets and the flare are easy. Allow eight to ten hours, plus a toile. Our guide on making a toile is worth following for fitted trousers, and our post on how to lengthen or shorten trousers shows where to change the length so the flare stays at the knee.
What's in the pattern
- Two fronts and two backs
- Two front pocket facings and four pocket bags
- A fly shield, the waistband and a belt loop strip
- Two patch back pockets
Notions: a trouser zip; a trouser hook and bar or a button for the waistband; fusible interfacing for the waistband and fly; about 40 cm (16 in) of pocketing. The guide lists every piece with its cut count, the notions with their quantities, the fabric quantity for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout; the fabric chart gives every size.
How to sew flared trousers
- Fuse the interfacing to the waistband and fly pieces; sew the back darts.
- Make the patch back pockets and topstitch them to the backs; sew the slanted front pockets.
- Sew the zip fly with its shield, then the centre back seam.
- Sew the outseams and the inseams; try them on and check the knee and the flare.
- Make the belt loops and attach the waistband.
- Hem the legs with a double fold, finish the waistband closure and press.
Hem flares in the shoes you will wear with them: the length makes or breaks the line.
Frequently asked questions
How much fabric do I need for flared trousers?
About 2.1 to 2.5 m (2 3/8 to 2 3/4 yd) of 140 or 150 cm (55 or 60 in) wide fabric depending on the size, and 2.4 m (2 5/8 yd) at 110 cm (45 in) in EU 38; the flares cannot be nested as closely as straight legs. Ourlette computes the exact quantity for your size, length and fabric width, with a cutting layout.
Flare or bootcut?
A bootcut widens a little below the knee, enough to sit over a boot; a flare widens much more, to a hem of 60 cm (24 in) or so per leg in EU 38. Both are one option away from each other, and the rest of the trousers stays the same. For flared jeans with a yoke and scoop pockets, see the jeans pattern and set its leg to flare.
Is this flared trousers pattern free?
Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.
Can I make flares from a photo?
Yes. Start from this tested pattern and set the rise, leg, pockets and length yourself to match your photo, or, on the Maker and Atelier plans, upload the photo or paste a Pinterest or Instagram link, and Ourlette's AI pattern maker drafts the trousers in it from scratch. You can change any option by hand afterwards.






