Trousers & shorts

Cargo trousers sewing pattern

Relaxed straight-leg trousers with a zip fly, slanted front pockets, flap back pockets and a large flap cargo pocket on each thigh, a straight waistband and belt loops, drafted to your measurements or a standard size for women, men and children. Free to make; print them with their sewing guide, free as your first PDF, then with Library.

Difficulty: Confident 12 pieces woven
Free: adjust it to your measurements, preview it in 3D and print it as your free PDF. After it, Library prints the whole catalogue from $2.99 a month.
Cargo trousers

What you get

The pattern pieces for size EU 38 / US 6, drawn by Ourlette's drafting engine (seam allowances included).

Cargo trousers are workwear with pockets for everything: slanted hand pockets, buttoned flaps at the back and the big patch pockets with flaps on the thighs that give them their name. Ourlette drafts them from a trouser block with your measurements and a relaxed fit, a mid rise, a straight leg and matching topstitching, so they are roomy without being baggy; set the leg wide and the rise high for the current cargo look, or tapered for a utility pant.

Cargo trousers options

Every option redraws the pattern instantly, without using any AI:

  • Cargo pockets: a patch pocket with a flap on each thigh by default; turn them off for plain utility trousers.
  • Leg: straight by default; wide, tapered, barrel, jogger with ribbed cuffs, bootcut, slim or skinny.
  • Rise and fit: mid rise and relaxed by default; high, low or extra high; fitted, regular or oversized, plus extra hip ease.
  • Length: full by default, from short (cargo shorts) to bermuda, knee, capri or ankle, with a length adjustment of up to 25 cm (10 in); a plain hem by default, or a turn-up, elastic or rib cuffs, a side slit.
  • Pockets: slanted front pockets and flap back pockets by default; jeans scoop pockets, in-seam or patch pockets; welt, patch or no back pockets.
  • Waist and closure: a straight waistband with belt loops and a zip fly by default; a contoured band, an elastic or drawstring waist for pull-on cargos; a button fly, a side zip.
  • Topstitching: matching by default, contrast or none.

Made to measure or a standard size

Use your own measurements or a standard size: women's EU 32–54 (US 0–22, UK 4–26), men's XS to 3XL, or children's 2 to 14 years. Your waist, hip, inseam and crotch depth decide the fit, and the measuring assistant explains each; the cargo pockets are placed and sized from your thigh and leg length, so they sit where your hand falls. See how to measure yourself for trousers.

Best fabrics for cargo trousers

Sturdy wovens: cotton twill, ripstop, cotton canvas, cotton drill, herringbone twill or a stretch twill for an easier fit. Medium weights, 250 to 350 g/m² (7 to 10 oz), take the topstitching and the pocket bulk well. Our post on sewing with twill covers needles, thread and pressing; how to topstitch straight and even the detail that makes cargos look bought.

How hard is it to sew?

A project for a confident sewist: a zip fly, flap pockets front and back, and twelve pattern pieces to keep track of. None of the steps is hard on its own, and the cargo pockets are patch pockets with a pleat and a flap. Allow 8 to 10 hours. Our post on how to sew patch pockets that stay square covers the pockets you see most.

What's in the pattern

  • Two fronts and two backs
  • Two front pocket facings and four pocket bags
  • A fly shield, the waistband and a belt loop strip
  • Four jettings, four bags and four flap pieces for the back pockets
  • Two cargo pockets and four cargo flap pieces

Notions: a trouser zip; a trouser hook and bar or a button; buttons, 15 mm (5/8 in), for the four flaps; fusible interfacing for the waistband and fly; topstitching thread; about 60 cm (24 in) of pocketing. The guide lists every piece with its cut count, the notions with their quantities, the fabric quantity for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout; the fabric chart gives every size.

How to sew cargo trousers

  1. Fuse the interfacing, set up for topstitching and sew the back darts.
  2. Make the back pockets and their flaps, then the slanted front pockets.
  3. Make the cargo pockets with their flaps and topstitch them to the legs.
  4. Sew the zip fly with its shield, then the centre back seam.
  5. Sew the outseams and the inseams; make the belt loops and attach the waistband.
  6. Hem the legs, make the buttonholes, sew the buttons and the waistband closure, and press.

Cargo shorts are the same pattern at bermuda length: switch the length option and the pockets move up with the leg.

Frequently asked questions

How much fabric do I need for cargo trousers?

An adult pair takes 2 to 2.4 m (2 1/4 to 2 5/8 yd) of 140 or 150 cm (55 or 60 in) wide fabric depending on the size, and about 2.3 m (2 1/2 yd) at 110 cm (45 in) in EU 38; the pockets and flaps add about 30 cm (12 in) over plain trousers. Ourlette computes the exact quantity for your size, length and fabric width, with a cutting layout.

Can I make pull-on cargo trousers?

Yes. Switch the waist to elastic or elastic and drawstring and the closure to pull-on: the fly disappears and the waistband becomes a casing. Choose the jogger leg with ribbed cuffs for cargo joggers.

Is this cargo trousers pattern free?

Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.

Can I make cargo pants from a photo?

Yes. Start from this tested pattern and set the leg, rise, pockets and hem yourself to match your photo, or, on the Maker and Atelier plans, upload the photo or paste a Pinterest or Instagram link, and Ourlette's AI pattern maker drafts the trousers in it from scratch. You can change any option by hand afterwards.