Tops

Band-collar shirt sewing pattern

A shirt with a band (mandarin) collar and no collar points, a plain folded button front, a back yoke with a box pleat, long sleeves with buttoned cuffs and a shirttail hem: the grandad or collarless shirt, drafted to your measurements or a standard size for women, men and children. Free to make; print it with its sewing guide, free as your first PDF, then with Library.

Difficulty: Intermediate 10 pieces woven
Free: adjust it to your measurements, preview it in 3D and print it as your free PDF. After it, Library prints the whole catalogue from $2.99 a month.
Band-collar shirt

What you get

The pattern pieces for size EU 38 / US 6, drawn by Ourlette's drafting engine (seam allowances included).

A band-collar shirt is a classic shirt without the collar points: only the stand remains, buttoned at the neck or left open. It is the grandad shirt, the linen summer shirt and the shirt to wear under a jacket without a tie. Ourlette drafts it from a shirt block with your measurements and a regular fit, with a French (plain folded) front rather than a box placket for a cleaner look, a back yoke with a box pleat for ease across the shoulders, and tower plackets and cuffs on the sleeves.

Band-collar shirt options

Every option redraws the pattern instantly, without using any AI:

  • Collar: a band collar by default, with a size from 70 to 150 %; a collar on a stand, a camp collar or none.
  • Front: a plain folded front by default; a box placket, hidden buttons or a half placket for a popover; buttons spaced for you, or the number and size you set; snaps or loops instead.
  • Back: a straight yoke with a box pleat by default; curved or pointed yokes, an inverted or side pleats, or no pleat.
  • Sleeves: long with buttoned cuffs by default; short, elbow or three-quarter; band cuffs, roll-up tabs.
  • Fit and length: regular by default, or fitted, relaxed or oversized; below the seat by default, from cropped to thigh, with a length adjustment of up to 25 cm (10 in).
  • Hem and pockets: a shirttail hem by default, or straight with side slits; a chest pocket or none.

Made to measure or a standard size

Use your own measurements or a standard size: women's EU 32–54 (US 0–22, UK 4–26), men's XS to 3XL, or children's 2 to 14 years. The band is drafted from your neck measurement, so it closes comfortably at the top button; your arm length sets the sleeve and the cuff is cut to your wrist. Men's and children's shirts are drafted without darts; so is a women's shirt at regular fit.

Best fabrics for a band-collar shirt

Linen is the classic; cotton poplin, oxford cloth, chambray, cotton lawn, double gauze or seersucker all work. Our post on sewing with linen covers the pre-wash and the pressing, and sewing with cotton poplin the crisp version. Flat-felled seams by default keep the inside clean.

How hard is it to sew?

A project for a confident sewist and a good first shirt: there are no collar points to turn, and the band collar is the easiest collar to set. The yoke, the tower plackets and the flat-felled seams take care; the guide explains each with your pattern's own numbers. Allow eight to ten hours. Our posts on how to sew a yoke and how to sew a cuff cover the steps that show.

What's in the pattern

  • Two fronts and a back cut on the fold, with the back yoke cut twice on the fold
  • Two sleeves, with their tower plackets and underlaps
  • Four cuff pieces with interfacing
  • The band collar, cut twice on the fold, with its interfacing

Notions: buttons, 11 mm (7/16 in), spaced for you down the front, one on the collar and one on each cuff; light fusible interfacing; topstitching thread. The guide lists every piece with its cut count, the notions with their quantities, the fabric quantity for 110, 140 and 150 cm (45, 55 and 60 in) wide fabric, and a cutting layout; the fabric chart gives every size.

How to sew a band-collar shirt

  1. Fuse the interfacing to the collar and cuffs, set up for topstitching and fold and stitch the plain front edges.
  2. Form the box pleat, then sew the back yoke to the back and the fronts with the burrito method.
  3. Sew the band collar to the neckline.
  4. Sew the tower plackets, set the sleeves in flat and fell the side and sleeve seams.
  5. Attach the cuffs and hem the shirttail with a narrow hem.
  6. Make the buttonholes, sew the buttons and press.

A shirttail hem is easiest with a narrow hem foot; our guide on how to hem shows the curve.

Frequently asked questions

How much fabric do I need for a band-collar shirt?

About 1.4 to 2.3 m (1 1/2 to 2 1/2 yd) of 140 or 150 cm (55 or 60 in) wide fabric depending on the size, and 2.1 m (2 3/8 yd) at 110 cm (45 in) in EU 38, plus 50 cm (20 in) of light interfacing. Ourlette computes the exact quantity for your size, sleeves and fabric width, with a cutting layout.

What is the difference between a band collar and a mandarin collar?

None in practice: both are a stand with no fall, 2.5 to 3.5 cm (1 to 1 3/8 in) high, closing at the front. Grandad collar is the British name. The classic shirt with collar points is the button-up shirt pattern, which shares every other option.

Is this band-collar shirt pattern free?

Making the pattern, changing every option and measurement, the 3D preview and the sewing guide on screen are free. Your first PDF is free; after that, printing needs a plan, from Library at $2.99 a month (or $29 a year), which prints the whole catalogue.

Can I make a shirt from a photo?

Yes. Start from this tested pattern and set the collar, front, yoke and sleeves yourself to match your photo, or, on the Maker and Atelier plans, upload the photo or paste a Pinterest or Instagram link, and Ourlette's AI pattern maker drafts the shirt in it from scratch. You can change any option by hand afterwards.